Service Truck Caption
Service Trucks Trade Shows Used Service Trucks for Sale Customers' Service Trucks 465 Lube Trailer
New 14000 w/14000lb. Crane In-Stock Service Truck  Service Truck Literature
Model 6000 w/6,000 lb. Crane

Will fit a small 2 ton truck. 15000 GVW-21000 GVW. It has a sleeved substructure and no wheel wells in the deck area.  A full 50" deck area has tread plate throughout.

Flush mounted lights, indeck tie downs, shown with our HD 18" workbench.  Custom built stainless steel hinges.

 
Major compartments on the Model 6000 are 46" H x 21" D. All compartments have automotive rubber gaskets, and also have a curled drip rail. They are pressurized and have "The Gang Lock" ™. All units have flush mounted lights, reflectors, mud flaps, fire extinguisher, safety triangles and other items to meet ICC regulations.


Model 8000 w/8,000 lb. Crane


Heavy Duty Crane Body Compartments are 24" Dx56" H, all built with 10 ga. reinforced doors. Stainless steel hinges. A 1/4" crane tower is 100% welded to the over all substructure. A full 50" deck area has 1/8" tread plate throughout. A 24,000-33,000  GVW truck is recommended with a clear 84"CA. Compartments are all pressurized with automotive weather stripping used on all compartments. The "Gang Lock" ™ is used on all Models.

 

 
Model 10000 w/10,000 lb. Crane


Heavy Duty Crane Body. Fits on a 26,000 thru 33,000 GVW truck with at least a 120" clear CA. Two (2)  hydraulic outriggers. 10 Ga. 24" deep compartments and doors are some of the outstanding features of this unit
.
 
Model 14000 w/14,000 lb. Crane


This unit has a 14' crane body with lots of extra storage.  All Model 14000's have Feather Touch trigger handle controls. Main boom and extension boom cylinders are equipped with counter balance valves on the load holding sides. Four (4) corner mounted outriggers are used. Outriggers are also equipped with counter balance valves.


Feterl 14000 Model
14000 Tandem Service Truck  

Model 14000 Tandem w/14,000 lb. Crane
14000 Body has 70" front cabinets equipped with toolboxes on the streetside, extra large oxy/acty compartment vented curbside. Includes room for a plasma cutter and welder. Deck area has no wheel wells.14000lb hydraulic crane will extend 23'. ck here for more information

 

P.O. Box 398  411 Center Ave. W.
Salem, SD  57058
Phone: 605-425-2206    Fax: 605-425-2183
Toll Free: 1-800-367-8660